Showing posts with label welding. Show all posts
Showing posts with label welding. Show all posts

Monday, January 18, 2010

Handlebar-stems: An analysis

Ever since I saw the Cinelli Ram handle-stem, I have been fascinated with why we haven't moved to integrating in BMX. In this posting, I aim to to address the issues that come up in the upper steering system.


Note: a discussion on BikeGuide has pointed out two things: 1) I jump to the conclusion that forward/backward loads will not bend your bars without evidence; 2) The major challenge with 1-piece systems are their lack of adjustability both in reach (stem length) and bar angle (if, for some reason you don't want it in line...)


Vertical loads defined by loading both ends of the bar equally. In this case, the bends are stressed, and once the load exceeds the yield strength of the material, it will deform plastically (i.e. bend). During vertical loads, the stem is stressed vertically. Although longer stems will act as longer levers, when was the last time you bent a stem down?




Torsional Loads are typically qualified by loading of one side of the handlebar. These loads exhibit the traditional stress to the bends, but create a torsional load on the stem. A quick side note: torsional stiffness is proportional to stem body diameter, material choice, and thickness


Forward Loads are those times when you land a bit flat-bottom and find yourself shoving the handlebars forward. These loads are not characterized by large forces, but often end in the bars slipping in the stem. Promptly followed by a trip to the tool bag. Now some people claim that it is better the bar slips in this situation (or the opposite load where the front of the bars are loaded backward). The probability that either of these situations would end in plastic deformation is very small. Seeing as forward/backward loads are the only loads that can make the stem slip, and there is little chance of damaging the bars, I see little reason to not fix the bars to the stem.



So what do I propose? I would like to see more integrated bar-stems in the BMX market. As we get more market saturation, integrated bar-stems will be available in all the different geometries stems and handlebars come in. And let's face it, there are so few innovations in handlebars, the sector could use a bit more spice. We'll have to change our perspective on how these are clamped on the steerer tube, but that will spur innovation, and reduce overall weight.




Some examples...





Thursday, December 3, 2009

One Problem With Welding (HAZ)

What changed when Odyssey introduced 41 Thermal? Aside from finally focusing on the quality of their components, and backing them up with easy customer service, they started to heat treat their welded components after welding.

The issue with welding

Although there is extra material when you weld two components together, the biggest detriment is the Heat Affected Zone (HAZ). The area immediately around the weld becomes stiffer and less ductile. These properties lead to more propensity to crack. Take a look at cracks, and you'll find many of them occur around welds (cracks in welds are always a manufacturing defect, usually arising from voids in the weld).


Gussets

This is a problem that has plagued bicycles since we switched from lugged and brazed frames to welded. Gussets are one attempt at fixing it. The idea is that welding a plate effectively moves the HAZ farther down the tube, reducing the likely hood to crack. However, this adds a thick plate, and welds to the structure, leaving us with a heavier component. And let's face it, gussets are just not an elegant solution (take a look at the cool design/gusset below. Reminds me of lugged steel road frames).


Internal Gussets

Internal gussets are NOT gussets. They are a type of offset butting. Although a good idea (because it places material where it can most effectively support the loads encountered), these do not move the HAZ. You may be able to argue the added thickness slightly shrinks the HAZ, it does not significantly affect it.


Heat Treated Tubing

Tube manufacturers, like True Temper, Sanko, etc, will heat treat their tubesets after extrusion to optimize their mechanical properties. However, this heat treating is altered in the HAZ. Farther down the tube, where the material is no heated significantly, the mechanical properties introduced by heat treating still stands. Does using heat treated tubes reduce cracking? Hesitently, yes, heat treated tubes MAY help to reduce cracking, but cannot make significant changes to the HAZ.


So what do we do?

Post Weld Heat Treating works to relieve the HAZ. The irregular shape of the weld remains, but the brittleness of the surrounding tubes can be significantly reduced. This simple step is often overlooked because it usually requires shipping the component off, or adding machines to the shop. But it is worth it. Take a look at Odyssey's post weld heat treating and how it has brought that company (along with a better business model) to great status in BMX.

So the next time you see a company bragging about 4Q Baked, 420 Baked, or these other marketing ploys (including 41 thermal, but they actually did it right), see if there is an alternative from a company telling you something meaningful: post weld heat treatment. Luckily, more an more frames are going this direction. We can only hope to see the same from Bars, cranks, forks, etc...