Showing posts with label budget. Show all posts
Showing posts with label budget. Show all posts

Sunday, April 25, 2010

Warranty Claims

I've had a number of cats come through the bike shop lately with various warranty claims. Some are legitimate (such as a new KHE tire's blown sidewall), while others are completely rider error. In this post I intend to discuss the purpose, scope, and effects of the warranty process...


A Little History

There was once a day when a manufacturing failure would lead to the rider swear off that particular company for life... or until they came out with some far too cool new part. At the same time, the quality of complementary that made its way into the BMX market was marginal. Tolerances were wide open, if specified at all; and materials were often very poor. What this did was leave an opening in the market for some quality.

Enter the high(er) quality manufacturers. Profile Racing began offering tight tolerance machined hubs; Primo introduced their cold forged Powerbite cranks (cold forging offers greater tolerance control than casting or hot forging along with good grain orientation in the outer limits of the structure). These components earned a reputation for being less likely to bend, break, or snap. But how could companies compete with high end, and high dollar, components?

In the late 1990's Odyssey took a turn from mediocre quality, fair variety components, toward a different business model. The idea was to introduce two concurrent and complimentary ideas to their product line: post weld heat treatment for their forks, and a no-questions-asked warranty.

41 Thermal, as they call their heat treatment regimen is designed not only to reduce the heat affected zone inherent in welded components, but also to make the component bend noticeably before breaking. From this, Odyssey forks developed a reputation for being extremely strong, while staying cost, and weight competitive. Even though there have been quite a number of bent components over the years, the easy, and fairly quick warranty process has reduced the amount of negative feedback on their components.

Today, it is quite common for riders to suggest purchasing Odyssey components because of their amazingly lenient warranty process (Nuno even offered to warranty my cracked Polycarbonate Twisted pedals!) Picking up on this, many other manufacturers have eased and streamlined their warranty systems. They have learned that supporting the rider, even to some immediate detriment, can have long term beneficial effects.


Purpose of the Warranty Process

You can ask around and I am sure you will get various responses to this question. My response is from the perspective of a shop manager, rider, and prospective manufacturer. The warranty process should be designed to induce a positive company image in the mind of the rider. What this means is that a component should not fail without due cause (i.e. riding hard will inevitably damage parts, especially when we get into lighter weight components). If a component fails due to manufacturing errors, it should most definitely be covered under warranty. A common example of this is a crack directly on a weld, which indicates contamination in the melt pool, and subsequent weld.

There is another purpose, as the Odyssey example shows: to increase customer base simply because of the streamlined warranty process. Although I do not list this as a primary reason for purchasing a particular component, it is certainly beneficial to the rider; even more so if they are on a budget.


When a claim goes too far

I had a cat come into the shop with corroded nipples on a machine built (pre-built) wheel. He claimed it was a warranty issue because he had never see that happen before. Perhaps unfortunately for him, I had. The corrosion was due to excessive sweating seeping onto the aluminum nipples. The electrolytes in sweat increase the rate of oxidation (and on some materials nitrogenation) of materials. Often these oxides are much more brittle than their parent materials, leading to sudden failure or cracking. The point is manufacturers have no way of knowing, nor a reasonable way of preventing all of the outlying conditions that may lead to failure.

So the next time a part fails on you, ask yourself a few questions:

* How did the component fail (break? bend? where? how much?)?
* What lead to the failure?
* Could it have been a manufacturing issue?

Of course you could send in the product in any case, but if they deny your claim, don't give them a bad wrap if they conclude that it is not a manufacturing issue. If they do deny and you feel it is unjust, post it up on line with the question of whether it is a manufacturing fault.

Monday, November 2, 2009

Plastic Pedals



In the past few years, plastic pedals have become much more prolific in BMX. My first experiences started by just grabbing some Welgos from the shop to try saving a bit of weight. I never had much trouble with the grip of even those! And the weight savings was substantial. Since then, Odyssey, Animal, and virtually every company with a pedal has a plastic version available too. Why am I so excited about this?

  1. They're cheap, and lets face it, BMX is full of cats who want good components, for as little money as possible.
  2. They're light, light, light. At around 13 oz per pair, who can complain?
  3. The colors man, the colors! Odyssey has really shown the potential with using polymers in pedals (and seats, but that is another discussion). A wide range of colors are available from most manufacturers. Odyssey even offers Glow-in-the-dark, and Chameleon (UV activated, color changing) . Lets face it, aesthetics do play a role in our component choices. And rightfully so, if you like the way your bike looks, you're more likely to get motivated to hop on it.
  4. Grinding/sliding, whatever you want to call it, is more Kosher with plastics. If you ever get bother for hopping on a ledge, just point at you pedals and say plastic. Certainly, there are some thick-headed people out there who will still give you trouble (because their "girlfirend" left them, no body calls to see if their ok, and they generally have personal issues they feel you are responsible for).
  5. You can finally stop feeling bad for riding a bike... wait a minute... Haro Recycled plastic pedals

One thing I will try to do throughout this blog is to show both sides of the story. Plastic pedals are not for everyone. There are definite trade-offs with plastics.

  1. Grip. Some people complain that the little "pins" in plastic pedals either do not give enough grip, or wear down too quickly, so there is no grip. This is a fair concern, as some people prefer more grip than others. I would say it comes down to riding style. I thought I had seen something like the Hoffman Solemate pedals, where a nut and bolt are used as pins, avoiding the whole "what?!? Stripped? I didn't even tighten it! ARRRGGGG!!!" problem. Edit: The new JC pedals from Odyssey will have an interesting new pedal design:
  2. Weaker spindles. When these pedals first started coming out, people pointed out that the spindles were just run-of-the-mill, cheap steel spindles. This is a big concern to pedal destroyers. However, since competition in plastic pedals has increased, companies are putting in the same grade spindles as their aluminum-bodied counterparts. I still think pedal spindles are designed backward, but that is for a future post (after some CAD work).
  3. Having such cheap pedals may lead some people to the idea that it is ok to just toss them out every month or so. Which is fine, as long as you find a new home for the old ones. Donate them to some new rider, or use them in a side project. We should avoid the idea of disposable products.
  4. No Anodizing. And lets face it, ano is sexy.

Conclusion: Plastic pedals are great for BMX. Their low cost and low weight fit right in. However, we will likely never see them owning the market, as some people will want the look, grip, or feel of aluminum-bodied pedals.